Has anyone gotten Pre-launch to work ?I'm experimenting with speeding up logon times for an RDS app in a 7.6 View RDS Farm (Server 2016).
The process for configuring it is described : Horizon RDS Application Pre-launch – VMware TestDrive
However....it doesn't work.
no pre-launch sessions starting...
It works well on VMware blast but cannot work on PCoIP. Please help me this is the product environment
vSphere HAが有効なクラスタ環境の場合、ESXiホストにHAに関する警告が表示される場合があります。
このような場合、発生した警告からVMwareナレッジを検索し、対処を行うことになります。
ただ、ESXiを右クリック「vSphere HA用に再構成」では解消されない場合があり、
そのような場合についてはクラスタ全体としてvSphere HAを再構成する方法が有効です。
以下にその方法を画像付きで紹介したいと思います。
vSphere HAの再設定タスクが実行されるので完了まで待機します。
上記がWeb ClientでのvSphere HAの再構成の手順となります。
上記がvSphere Client(HTML5 Client)でのHA再構成の手順となります。
HAに関する警告が解消されるかご確認ください。
Hi, all!
When I run vmware-modconfig --console --install-all, I got a message vmware-installer" exited with status 256 in a log:
2020-02-24T15:08:09.393+03:00| modconfig| I125: Setting destination path for vmmon to "/lib/modules/5.5.2-1-MANJARO/misc/vmmon.ko". 2020-02-24T15:08:09.393+03:00| modconfig| I125: Extracting the vmmon source from "/usr/lib/vmware/modules/source/vmmon.tar". 2020-02-24T15:08:09.396+03:00| modconfig| I125: Successfully extracted the vmmon source. 2020-02-24T15:08:09.396+03:00| modconfig| I125: Building module with command "/sbin/make -j8 -C /tmp/modconfig-K1YF0o/vmmon-only auto-build HEADER_DIR=/lib/modules/5.5.2-1-MANJARO/build/include CC=/sbin/gcc IS_GCC_3=no" 2020-02-24T15:08:11.517+03:00| modconfig| I125: Successfully built vmmon. Module is currently at "/tmp/modconfig-K1YF0o/vmmon.o". 2020-02-24T15:08:11.517+03:00| modconfig| I125: Found the vmmon symvers file at "/tmp/modconfig-K1YF0o/vmmon-only/Module.symvers". 2020-02-24T15:08:11.517+03:00| modconfig| I125: Installing vmmon from /tmp/modconfig-K1YF0o/vmmon.o to /lib/modules/5.5.2-1-MANJARO/misc/vmmon.ko. 2020-02-24T15:08:11.518+03:00| modconfig| I125: Registering file "/lib/modules/5.5.2-1-MANJARO/misc/vmmon.ko". 2020-02-24T15:08:11.634+03:00| modconfig| I125: "/usr/lib/vmware-installer/3.0.0/vmware-installer" exited with status 256. 2020-02-24T15:08:11.634+03:00| modconfig| W115: Failed to install vmmon to /lib/modules/5.5.2-1-MANJARO/misc/vmmon.ko.
2020-02-24T15:08:11.634+03:00| modconfig| I125: Setting destination path for vmnet to "/lib/modules/5.5.2-1-MANJARO/misc/vmnet.ko". 2020-02-24T15:08:11.634+03:00| modconfig| I125: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar". 2020-02-24T15:08:11.637+03:00| modconfig| I125: Successfully extracted the vmnet source. 2020-02-24T15:08:11.637+03:00| modconfig| I125: Building module with command "/sbin/make -j8 -C /tmp/modconfig-K1YF0o/vmnet-only auto-build HEADER_DIR=/lib/modules/5.5.2-1-MANJARO/build/include CC=/sbin/gcc IS_GCC_3=no" 2020-02-24T15:08:14.187+03:00| modconfig| I125: Successfully built vmnet. Module is currently at "/tmp/modconfig-K1YF0o/vmnet.o". 2020-02-24T15:08:14.187+03:00| modconfig| I125: Found the vmnet symvers file at "/tmp/modconfig-K1YF0o/vmnet-only/Module.symvers". 2020-02-24T15:08:14.187+03:00| modconfig| I125: Installing vmnet from /tmp/modconfig-K1YF0o/vmnet.o to /lib/modules/5.5.2-1-MANJARO/misc/vmnet.ko. 2020-02-24T15:08:14.188+03:00| modconfig| I125: Registering file "/lib/modules/5.5.2-1-MANJARO/misc/vmnet.ko". 2020-02-24T15:08:14.295+03:00| modconfig| I125: "/usr/lib/vmware-installer/3.0.0/vmware-installer" exited with status 256. 2020-02-24T15:08:14.295+03:00| modconfig| W115: Failed to install vmnet to /lib/modules/5.5.2-1-MANJARO/misc/vmnet.ko. 2020-02-24T15:08:14.303+03:00| modconfig| I125: We are now shutdown. Ready to die!
I tried to install kernel modules manually run next commands in a console:
depmod modprobe vmmon, vmnet
Modules successfully running. But after launching virtual machine in vmware-player (GUI) it crashed with message in a log file that Failed to open device "/dev/vmci":
272 2020-02-24T14:47:48.039+03:00| vmplayer| I125: vm power operation abort, error = Failed to open device "/dev/vmci": No such file or directory 273 2020-02-24T14:47:48.039+03:00| vmplayer| I125+ Please make sure that the kernel module 'vmci' is loaded. 274 2020-02-24T14:47:48.039+03:00| vmplayer| I125+ Module 'DevicePowerOn' power on failed. 275 2020-02-24T14:47:48.039+03:00| vmplayer| I125+ Failed to start the virtual machine. 276 2020-02-24T14:47:48.039+03:00| vmplayer| I125+ .
Why vmware-installer can not install all kernel modules? What to do?
Distributive Linux - ManjaroLinux Stable with last updates, Linux kernel - 5.5.2
VMWare Player 15.5.1
Full logs attached
We are currently using Content Filter to add Bookmarks to Safari, but we want to open up full access to the internet. Of course adding URLs in Content Filter Whitelist only allows those URLs. Is there a workaround for this? Thanks in advance.
We have a developer trying to develop an app utilizing the new iOS 13 SSO Extensions. Has anyone had success with this? He has run into many bugs and roadblocks.
Configure an SSO Extension Profile
Hello Team, Will non-DEP/unsupervised device will get the VPP app If the VPP app is deployed with managed distribution with Device based licensing? If yes, then does app converts to user based licensed VPP app on device or App on device will just prompt for Apple ID as like any other non VPP app?@
I have a current Horizon 7 setup for remote access to a RDS farm.
I also have another RDS server that uses the watchguard Authpoint MFA application.
I have attempted to configure this in a new farm for access via Horizon - I can connect OK but when the desktop starts I have to enter the AD credentials a second time but do not get the MFA prompt.
Has anyone out there attempted to use this combination?
Hi Experts,
When Deploy the NSX-T just for the DFW?
what component will be used?
Just the NSX-Manager，NSX-Controller?
will the edge be needed to deploy?
Thanks.
Post deploying NSX-T Autonomous Edge client, specified password (during wizard) does not work and below error is seen on console.
This document talks about resetting the password without redeploying the appliance.
Login with root and enter default password vmware ; you will be prompted to enter the current password followed by new password. In my example password was VMware@12345
Post entering the password, it will auto-login.
Let's change the admin password and then reboot the appliance. To reset password for admin account we need to run below command and enter new password.
Now reboot the appliance. The password notification should not come up and you will be able to login with new credentials.
Hello All,
I am trying to access the VIDM console after enter the user name and password getting attached error. Can some one please help me on this.
Hello All,
Desktop pool is auto disabling and shows error "Error During Provisioning: No host is compatible with the Virtual Machine.". As i checked VDI has been created in vcenter and i observed VMware view console it shows customizing.
Good morning,
I tried to install vcenter server 6.7 on windows server 2019 (for many reasons it's better for me this method over appliance) and failed because of this error:
[ vminst-con.log extract ]
[Running] C:\Program Files\VMware\vCenter Server\firstboot\visl-support-firstboot.py
Result:
--------------------------
Failure
2020-02-24T11:42:55.341Z Running command: ['C:\\Windows\\system32\\icacls.exe', 'C:\\ProgramData\\VMware\\vCenterServer\\cfg/vmware-rhttpproxy/ssl', '/grant:r', '*S-1-5-18:(OI)(CI)(F)', '/grant:r', '*S-1-5-32-544:(OI)(CI)(F)', '/inheritance:r', '/L', '/Q']
2020-02-24T11:42:55.404Z Done running command
2020-02-24T11:42:55.404Z Running command: ['C:\\Windows\\system32\\icacls.exe', 'C:\\ProgramData\\VMware\\vCenterServer\\cfg/vmware-rhttpproxy/ssl\\*', '/reset', '/T', '/L', '/Q']
2020-02-24T11:42:55.435Z Done running command
Error Code : 1021
It seems a strange permission problem but I cannot understand it as I'm running setup with an Administrative user.
I shortened here the log for convenience but if needed I can share more of it.
Has anyone any suggestion?
Thank you
Matteo
Hi all, wondering if anyone here have encountered the same issue I’m facing in my lab testing vSAN 6.6.1:
I was just setting up the vSAN from scratch, a brand new vSAN cluster setup with the latest 6.5U1 ESXi host install with the latest vCenter 6.5U1 install on a separate host – all with the latest updates and patches as of today.
I ended up getting the same “vSAN cluster configuration consistency” warning that also listed the issue being each of the 6 hosts showing “invalid request (Correct version of vSAN Health installed?)”
I noticed the following behavior:
– initial setup of the cluster with vSAN without disks claimed had them in multicast mode without any network partition problem (tested multicast traffic was working with tcpdump-uw)
– upon claiming disks, it tried to go into unicast mode and then every single host became partitioned. Unicastagent list came up empty. Cluster complains of being partitioned.
– manually adding the unicastagent entries resolved the partition problem, and that’s how I ended up with the “vSAN cluster configuration consistency”
Anyone have similar issues and can advise how to proceed? Thanks in advance!
Hello Everyone,
I have the below code and I'm getting data back from the function but unable to filter it by calling $Sessions.Name. Goal is to be able to filter between vcenter and other vami devices. Anyone see what I'm doing wrong with my code or know a better way to filter a list?
{
$BaseAuthURL = "https://" + $ip + "/rest/com/vmware/cis/"
$SessionURL = $BaseAuthURL + "session"
$Header = @{"Authorization" = "Basic "+[System.Convert]::ToBase64String([System.Text.Encoding]::UTF8.GetBytes($User+':'+$Password))}
$Type = "application/json"
#Authenticate
Try
{
$SessionResponse = Invoke-RestMethod -Uri $SessionURL -Headers $Header -Method POST -ContentType $Type -SkipCertificateCheck
}
Catch
{
$_.Exception.ToString()
$error[0] | Format-List -Force
}
# Extracting the session ID from the response
$SessionHeader = @{'vmware-api-session-id' = $SessionResponse.value}
return$SessionHeader
}
functionAPIAuth {
[hashtable]$Sessions = @{}
#VC1 API Call
if($VC1IP -AND $VC1Username -AND $VC1Password) {
$User = $VC1Username
$Password = $VC1Password
$IP = $VC1IP
$Sessions.VC1Session = GetVAMISessionID $IP$User$Password
}
#VC2 API Call
if($VC2IP -AND $VC2Username -AND $VC2Password) {
$User = $VC2Username
$Password = $VC2Password
$IP = $VC2IP
$Sessions.VC2Session = GetVAMISessionID $IP$User$Password
}
# PSC1 API Call
if($PSC1IP -AND $PSC1Username -AND $PSC1Password ){
$User = $PSC1Username
$Password = $PSC1Password
$IP = $PSC1IP
$Sessions.PSC1Session = GetVAMISessionID $IP$User$Password
}
# PSC2 API Call
if($PSC2IP -AND $PSC2Username -AND $PSC2Password){
$User = $PSC2Username
$Password = $PSC2Password
$IP = $PSC2IP
$Sessions.PSC2Session = GetVAMISessionID $IP$User$Password
}
write-host$Sessions.Name
Return$Sessions
}
$VC1IP = "xxxxxxxxxxx"
$VC1Username = "administrator@vsphere.local"
$VC1Password = "xxxxxxxxxxxxxxx"
$VC2IP = "xxxxxxxxxxxxx"
$VC2Username = "administrator@vsphere.local"
$VC2Password = "xxxxxxxxxxxxxxxx"
$PSC1IP = "xxxxxxxxxxxxxxxxxxxx"
$PSC1Username = "root"
$PSC1Password = "xxxxxxxxxxxxxxx"
$PSC2IP = "xxxxxxxxxxxxx"
$PSC2Username = "root"
$PSC2Password = "xxxxxxxxxxxxx"
$Sessions = APIAuth $VC1IP$VC1Username$VC1Password$VC2IP$VC2Username$VC2Password$PSC1IP$PSC1Username$PSC1Password$PSC2IP$PSC2Username$PSC2Password
The output from the above code is
$Sessions
Name Value
---- -----
PSC1Session {vmware-api-session-id}
VC1Session {vmware-api-session-id}
PSC2Session {vmware-api-session-id}
VC2Session {vmware-api-session-id}
When name of the VM is a long, use get-vm command to get VM name that show ... after VM name.
I want to show full name of VM, What should I do?
I will create a script to connection to vSphere, and the script will sent to user to use.
I don't want to show password in the script.
What should I do?
Greetings everyone, i am trying to create a Proof Of Concept and i would like to achieve the following architecture : 3 load balanced servers with roles DS,API,AWCM in DMZ Example: --> ServerDS01.awlab.local --> ServerDS02.awlab.local --> ServerDS03.awlab.local Load Balanced VIP --> ServerDS.awlab.com 3 load balanced servers with the Admin Console role in the internal network. Example: --> ServerCN01.awlab.local --> ServerCN02.awlab.local --> ServerCN03.awlab.local Load Balanced VIP --> ServerCN.awlab.com All the above servers will be out of the domain. SQL database will be in the internal network with AlwaysON AG (Server in the AD Domain) Following the documentation of best practices (https://docs.vmware.com/en/VMware-Workspace-ONE-UEM/1907/WS1_Installation.pdf) it is not clear which is the URL of the Admin console and which is the URL of the device services that has to be used during the installation of WS1. The documentation states that i have to use the internal FQDN of the server for the Admin console (CN) and the external FQDN for the Device Services (DS) URL So this means that the first time i will launch the installer on the first Admin Console server i will have to put his FQDN and not the load balancer FQDN? (ex. ServerCN01.awlab.local ) and for Devices services URL the FQDN of the first Device Services server ? (ServerDS01.awlab.local) or the load balanced FQDN of the DS ? I have checked other sites that advice to use the same URL on both Admin console and Device Services and then ' play' with the CNAME of the device services in order to avoid AWCM problems... (https://digital-work.space/display/AIRWATCH/AirWatch+Install) From your experiences which URL has to be used in each installation ? Thank you in advance for your answer. Regards, Nicolas
