I have a problem with a vSphere 5.0 ESXi host.
Its a DL380g7.
When im adding a HP P212 Adapter to direct path and add the SCSI-Adapter in a VM, after start up the VM the ESX-host get a Purple Screen with the error message : Panic requested by one or more 3rd party NMI handlers.
All is green in config, see above image,
but if i attach the directpath P212 to a VM,
as soom as the VM starts booting, the host goes into Purple screen of death (PSOD)
VMware ESXi 5.0.0 [Releasebuild-504890 x86_64]
Panic requested by one or more 3rd party NMI Handlers
cr0=0x80010031 cr2=0xd0915d30 cr3=0x80d15000 cr4=0x2768
*PCPU0:6491/vmx-vcpu-1:SRVBackup01
PCPU 0: UUISISISUISISISUISSHISISISIS
Code start: 0x418039200000 VMK uptime: 0:00:50:03.300
Panic@vmkernel#nover+0xa9 stack: 0x0
Reset request on FSS handle 233645 (0 outstanding commands)
2011-11-11T08:37:05.207Z cpu15:2173)VSCSI: 2419: handle 8194(vscsi0:0):Completing reset (0 outstanding commands)
2011-11-11T08:37:05.207Z cpu15:2173)VSCSI: 2621: handle 8195(vscsi0:1):Reset [Retries: 0/0]
2011-11-11T08:37:05.207Z cpu15:2173)VSCSI: 2419: handle 8195(vscsi0:1):Completing reset (0 outstanding commands)
2011-11-11T08:37:12.341Z cpu9:2057)NMP: nmp_ThrottleLogForDevice:2318: Cmd 0x89 (0x4124403d17c0) to dev "naa.600c0ff00012729b16b48c4e01000000" on path "vmhba2:C0:T0:L1" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0.Act:NONE
2011-11-11T08:37:12.341Z cpu9:2057)ScsiDeviceIO: 2316: Cmd(0x4124403d17c0) 0x89, CmdSN 0xb01e to dev "naa.600c0ff00012729b16b48c4e01000000" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0.
2011-11-11T08:37:12.341Z cpu9:2057)ScsiDeviceIO: 2316: Cmd(0x41244039b1c0) 0x89, CmdSN 0xb01f to dev "naa.600c0ff00012729b16b48c4e01000000" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0.
Help please.
Sincerely
Mikael Winther