Hi ,
Assuming that i have around 20 ESX hosts in a cluster and each host has a vSwitch with different Vlans configured on them e.g ranging from Vlan 1-15 . Lets say i have to put one host in this cluster in the maintenance mode. What things do i have to check before putting that host in the maintenance mode so as to make sure all machines on this host migrate to another ESX host.
Also Assume:
1. vMotion is configured
2. VMKernal is set
3. Virtual machines are running off a SAN storage.
My thought is that if this host has Vlans 1,7,9,11 configured on it then same Vlans should also be setup on either one of the other hosts in the cluster, not necessarily on single ESX host but may same VLANS distributed off different hosts.
Waiting for the reply