Hi All,
I currently have 3 ESXi 5 hots, Identical from hardware to vswitch configurations. I am currently setting up the vmkernel ports for the ISCSI initiators using the Dell Equallogic setup script.
It has created the 3 vmkernel ports and each ones is bound to a vmnic, each vmkernal port has one active nic and 2 "not used", when i look at hte 3rd host and look at the iSCSI initiator port bindings, i can see all 3 active paths, however, when i look at host 1 and 3, one path says "not used" and as mentioned above, these 3 host are identical, im just lost as to why the last path is "not used" and yet the host host shows all active which is what i expected to see.
I have stuck some screenshots in a word document attached
Thank you again for your help.